注册 登录  
 加关注
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

多快好省2.0智慧数据库资源配置人财物势

实事求是2.0真实气度新间六轴三段十八维实现美丽中国药典弯道超车药品标准科学跨越

 
 
 

日志

 
 
关于我

中国药典节能减排方案 中国方案多快好省2.0 美丽中国药典梦梁贵键 中国药典梦 梁贵键 液色迷人感恩心责任肩 美丽中国药典梦 美丽中国药典弯道超车 实事求是创新发展案例 中国药品标准科学跨越 药物临床试验科学跨越 聪明人用笨办法做事情 美丽中国药典节能减排 美国药典委员会 空军总医院一期临床 空军总医院治多汗症 实事求是知不易行更难 战斗力标准是什么?敢打打硬仗能胜打大仗 敢打打硬仗能胜打大仗 战斗力标准敢打必胜 中国药典节能减排方案

网易考拉推荐

USP色谱柱中文解说  

2014-06-23 03:27:50|  分类: 默认分类 |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |

USP色谱柱中文解说

USP关于色谱柱的要求对应的色谱柱类型。

L1-C18柱  L3-硅胶柱  L7:C8柱 L8:NH2柱  L9:强酸性阳离子 L10:CN柱  L11:苯基柱

L1:十八烷基键合多孔硅胶或无机氧化物微粒固定相, 简称C18或ODS
L2:30~50um表面多孔薄壳型键合C18(ODS)固定相
L3:多孔硅胶微粒 即一般的硅胶柱
L4:30~50um表面多孔薄壳型硅胶
L5:30~50um表面多孔薄壳型氧化铝
L6:30~50um实心微球表面包覆磺化碳氟聚合物-强阳离子交换固定相
L7:全多孔硅胶微粒键合C8官能团固定相 简称C8柱
L8:全多孔硅胶微粒键合非交联NH2固定相 简称NH2柱
L9:强酸性阳离子交换基团键合全多孔不规则形硅胶固定相
L10:多孔硅胶微球键合氰基固定相(CN) 简称CN柱
L11:键合苯基多孔硅胶微球固定相 简称苯基柱
L12:无孔微球键合季胺功能团的强阴离子填料
L13:三乙基硅烷化学键合全多孔硅胶微球固定相(C1) 简称C1柱
L14:10um硅胶化学键合强碱性季铵盐阴离子交换固定相 简称SAX柱
L15:已基硅烷化学键合全多孔硅胶微球固定相 简称C6柱
L16:二甲基硅烷化学键合全多孔硅胶微粒固定相
L17:氢型磺化交联苯乙烯-二乙烯基苯共聚物,强阳离子交换树脂
L18: 3~10um全多孔硅胶化学键合胺基(NH2)和氰基(CN)
L19:钙型磺化交联苯乙烯-二乙烯基苯共聚物,强阳离子交换树脂
L20:二羟基丙烷基化学键合多孔硅胶微球固定相(Diol) 简称二醇基柱
L21:刚性苯乙烯-二乙烯基苯共聚物微球
L22:带有磺酸基团的多孔苯乙烯阳离子交换树脂
L23:带有季胺基团的聚甲基丙烯酸甲酯或聚丙烯酸酯多孔离子交换树脂
L24:表面含有大量羟基的半刚性聚乙烯醇亲水凝胶
L25:聚甲基丙烯酸酯树脂交联羟基醚(表面含有残余羧基功能团)树脂。能分离分子量100~5000MW范围的水溶性中性、阳离子型及阴离子型聚合物(用聚氧乙烯测定)的固定相
L26:丁基硅烷化学键合全多孔硅胶微球固定相
L27:30~50um的全多孔硅胶微粒
L28:多功能载体,100?的高纯硅胶加以氨基键合以及C8反相键合的官能团
L29: 氧化铝,反相键合,含碳量低,氧化铝基聚丁二稀小球,5um,孔径80?
L30: 全多孔硅胶键合乙基硅烷固定相
L31: 季胺基改性孔径2000?的交联苯乙烯和二乙烯基苯(55%)强阴离子交换树脂
L32: L-脯氨酸铜配合物共价键合于不规则形硅胶微粒的配位体的交换手性色谱填料
L33: 能够分离分子量4000~40000MW范围蛋白质分子的球形硅胶固定相,pH稳定性好
L34:铅型磺化交联苯乙烯-二乙烯基苯共聚物强阳离子交换树脂,9um球形
L35:锆稳定的硅胶微球键合二醇基亲水分子单层固定相,孔径150?
L36: 5um胺丙基硅胶键合L-苯基氨基乙酸-3,5二硝基苯甲酰
L37:适合分离分子量2000~40,000Mw的聚甲基丙烯酸酯凝胶
L38:水溶性甲基丙烯酸酯基质SEC色谱柱
L39:亲水全多孔聚羟基甲基丙烯酸酯色谱柱
L40:Tris 3,5-二甲基苯基氨基甲酸酯纤维素涂覆多孔硅胶微球
L41:球形硅胶表面固定α1酸糖蛋白固定相
L42: C8和C18硅烷化学键合多孔硅胶固定相
L43: 硅胶微球键合五氟代苯基固定相
L44: 多功能固定相,60 ?高纯硅胶基质键合磺酸阳离子交换功能团和C8反相功能团
L45: β-环糊精键合多孔硅胶微球
L46: 季胺基改性苯乙烯-二乙烯基苯聚合物微球

USP  column  Packing
 
L1 —— Octadecyl silane chemically bonded to porous silica or ceramic micro-particles,3 to 10um in diameter
L2 —— Octadecyl silane chemically bonded to silica gel of a controlled surface porosity that has been bonded to a solid spherical core, 30 to 50um in diameter.
L3 —— Porous silica particles, 5 to 10um in diameter.
L4 —— Silica gel of controlled surface porosity bonded to a solid spherical core, 30 to 50um in diameter.
L5 —— Alumina of controlled surface porosity bonded to a solid spherical core , 30 to 50um in diameter.
L6 —— Strong cation –exchange packing-sulfonated fluorocarbon polymer coated on a solid spherical, 30 to 50um in diameter.
L7 —— Octylsilane chemically bonded to totally porous silica particles , 3 to 10um in diameter.
L8 —— An essentially monomolecular layer of aminopropylsilane chemically bonded to totally porous silica gel support, 10um in diameter.
L9 —— 10um irregular or spherical layer of aminopropylsilane chemically bonded, strongly acidic cation-exchange coating.
 
L10- Nitrile groups chemically bonded to porous silica particles, 3 to 10um in diameter.
L11- Phenyl group chemically bonded to porous silica particles, 5 to 10um in diameter.
L12- A strong anion-exchange packing made by chemically bonding a quaternary ammonium anion-exchange coating.
L13- Trimethylsilane chemically bonded to porous silica particles, 3 to 10um in diameter.
L14 – Silica gel 10um in diameter having a chemically bonding a quaternary ammonium anion-exchange coating.
L15 – Hexylsilane chemically bonded to totally porous silica particles, 3 to 10um in diameter.
L16 – Dimethylsilane chemically bonded to porous silica particles, 5 to 10um in diameter.
L17_ Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the hydrogen from, 7 to 11um in diameter.
L18 – Amion and cyano groups chemically bonded to porous silica particles, 3 to 10um in diameter.
L19 – Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divilbenzene copolymer in the calcaium from, about 10um in diameter.
L20- Dihydroxypropane groups chemically bonded porous silica particles , 5 to 10um in diameter.
L21 – A rigid, spherical styrene-divinylbenxene copolymer, 5 to 10um in diameter.
L22 – A cation-exchange resin made of porous polystyrene gel with sulfonic acid group, about 10um in diameter.
L23 – An cation-exchange resin made of porous polymethacrylate or polyacrylate gel with quaternary ammonium groups, about 10um in size.
L24 — A semi-right hydrophilic gel consisting of vinyl polymers with numerous hydroxyl groups on the matrix surface , 32 to 63um in diameter.5
L25 _Packing having the capacity to separate compounds with a molecular weight range from 100-5000 (as determined by polyethylene oxide), applied to neutral, and cationic water-soluble polymers. A polymethacrylate resin base, cross-linked with poly-hydroxylated ether (surface contained some residual carboxylfunctional groups) was fund suitable.
L26- Butyl silica chemically bonded to totally porous silica particles, 5 to 10um in diameter.
L27 _ Porous silica particles, 30 to 5um in diameter.
L28 – A multifunctional support, which consists of a high purity, 100 Å, spherical silica substrate that has been bonded with anionic exchange, amine functionality in addition to a conventional reversed phase C8 functionality.
L29_ Gamma alumina, reverse-phase, low carbon percentage by weight, alumina-based polybutadiene, spherical particles. 5um in diameter with a pore volume of 80 Å
 
L30- Ethyl silica chemically bonded to totally porous silica particles, 3 to 10um in diameter.L31 – A strong anion-exchange resin-quaternary amine bonded on latex particles attached to a core of 8.5um macroporous particles having a pore size of 2000Å and consisting of ethylvinylbenzene cross-linked with 55% divinylbenzene.L32 – A chiral ligand-exchange packing-L-proline copper complex covalently bonded to irregularly shaped silica particles, 5 to 10um in diameter.L33- Packing having the capacity to separate dextrans by molecular size over a range of 4000 to 500000 Da. It is spherical, silica-based, and processed to provide PH stability.6L34 – Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinybenzene copolymer in the lead form, about 9um in diameter.L35- A zirconium-stabilized spherical silica packing with a hydrophilic(diol-type) molecular monolayer bonded phase having p pore size of 150Å.L36 – A 3,5-dinitrobenzoyl derivative of L-phenylglycine  covalently bonded to 5um aminopropyl silica.L37 – Packing having the capacity to separate proteins by molecular size over range of 2000 to 40000Da. It is a polymethacrylate gel.L38 – A methacrylate-based size-exclusion packing for water-soluble samples.L39- A hydrophilic polyhydroxymethacrylate gel of totally porous spherical resin.L40 – Cellulose tris-3,5-dimethylphenylcarbmate coated porous silica particles, 5 to 20umin diameter.L40—Cellulose tris-3,5-dimethylphenylcarbamate coated porous silica particles,5 to 20 μm indiameter.L41-Immobilized а1 acid glycoprotein on spherical silica particles,5μm in diameter.L42—Octylsilane and octadecylsilane groups chemically bonded to porous silica particles, 5μm in diameter.L43—Pentafluorophenyl groups chemically bonded to silica particles by a propyl spacer, 5 to 10μm in diameter.L44—A multifunctional support,which consists of a high purity,60Å,spherical silica substrate that has been bonded with a cationic exchanger,sulfonic acid functionalityin addition to conventional reversed phase C8 functionality.L45—Beta cyclodextrin bonded to porous silica particles, 5 to 10μm in diameter.L46—Polystyrene/divinylbenzene substrate agglomerated with quaternary amine functionalized latex beads, 10μm in diameter.L47—High-capacity anion-exchange microporous substrate,funlly functionalized with trimethlyamine groups,8μm in diameter.7L48-Sulfonated,cross-linked polystyrene with an outer layer of submicron,porous,anion-exchange microbends 15μm in diameter.L49-A reversed-phase packing made by coating a thin layer of polybutadiene onto spherical porous zirconia particles,3 to 10μm in diameter.8L50-Multifunction resin with reversed-phase retention and strong anion-exchange functionalities.The resin consists of ethylvinylbenzene 55%cross-linked with divinylbenzene copolymer,3 to 15μm in diameter,and a surface area not less than 350㎡per g.Substrate is coated with quaternary ammonium functionalized latex particles consisting of styrene cross-linked with divinylbenzene.9L51—Amylose tris-3,5-dimethylphenylcarbamate-coated,porous,spherical,silica particles, 5 to 10μm in diameter.10L52—A strong cation exchange resin made of porous silica with sulfopropyl groups,5 to 10μm in diameter.11L53—Weak cation-exchange consisting of ethylvinylbenzene,55%cross-linked with divinylbenzene copolymer, 3 to 15μm in diameter.Substrate is surface grafted with carboxylic acid and/orphosphoric acid functionalized monomers.Capacity not less than 500μEq/column.12L54-A size exclusion medium made of covalent bonding of dextran to highly cross-linked porous agarose beads,about 13 μm in diameter.13L55-A strong cation-exchange resin made of porous silica coated with polybutadiene-maleic acid copolmer,about 5 μm in diameter.14L56-Isopropyl silane chemically bonded to totally porous silica paryicles,3 to 10μm in diameter.15L57-A chiral recognition protein,ovomucoid,chemically onded to silica particles,about 5μm in diameter,with a pore size of 120ÅL58-Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the sodium form,about7to 11μm in diameter,16▲    L59-Packing having the capoacity to separate proteins bymolecular weight over the range of 10 to 500kDa.It is spherical(10μm),silica-based, and processed to provide hydrophilic characteristics and pH stability.17▲USP28▲    L60-Spherical,porous silica gel,3 or 5μm in diameter,the surface of which has been covalently modified with palmitamido-propyl groups and endcapped with acetamidopropyl groups to a ligand density of about 6 μmoles per ㎡.18▲USP28 PhasesG1-Dimethylpolysilxane oil.G2-Dimethylpolysilxane gum.G3-50%Phenyl-50% methylpolysiloxane.G4-Diethylene glycol succinate polyester.G5-3-Cyanopropylpolysiloxane.G6-Trifluoropropylmethylpolysiloxane.G7-50%3-Cyanopropyl-50%phenylmethylsilicone.G8-80% Bis(3-cyanopropyl)-20% 3-cyanopropylphenylpolysi-loxane(percentages refer to molar substitution).G9-Methylvinylpolysiloxane.G10-Polyamide formed by reacting a C36 dicarboxylic acid with 1,3-di-4-piperidylpropane and piperidine in the respective mole ratios of 1.00:0.90:0.20.G11-Bis(2-ethylhexyl)sebacate polyester.G12-Phenyldiethanoamine succinate polyester.G13-Sorbitol.G14-Polyethylene glycol(av.mol.wt.of 950 to 1050).G15-Polyethylene glycol(av.mol.wt.of 3000 to 3700).G16-Polyethylene glycol compound(av.mol.wt.about 15,000).A high molecular weight compound of polyethene glycol with a diepoxide linker.Available commercially as Polyethylene Glycol Compound 20M,or as Carbowax 20M,from suppliers of chromatographic reagents.G17-75% Phenyl-25% methylpolysiloxane.G18-Polyalkylene glycol.G19-25% Phenyl-25% cyanopropyl-50% methylsilicone.G20-Polyethylene glycol(av.mol.wt.of 380 to 420).G21-Neopentyl glycol succinate.G22-Bis(2-ethylhexyl)phthalate.G23-Polyethyl glycol adipate.G24-Diisodecyl phthalate.G25-Polyethylene glycol compound TPA.A high molecular weight compound of a polyethylene glycol and a diepoxide as Carbowax 20M-TPA from suppliers of chromatographic reagents.G26-25% 2-Cyanoethyl-75% methylpolysiloxane.G27-5% Phenyl-95% methylpolysiloxane.G28-25% Phenyl-75% methylpolysiloxane.G29-3,3’-Thiodipropionitrile.G30-Tetraethylene glycol dimethyl ether.G31-Nonylphenoxypoly(ethyleneoxy)ethanol (av.ethyleneoxy chain length is 30);Nonoxynol 30.G32-20% Phenylmethyl-80% dimethylpolysiloxane.G33-20% Carborane-80% methylsilicone.G34-Diethylene glycol succinate polyester stabilized with phosphoric acid.G35-A high molecular weight compound of a polyethylene glycol and a diepoxide that is esterified with nitroterephthalic acid.G36-1% Vinyl-5% phenylmethylpolysiloxane.G37-Polyimide.G38-Phase G1 containing a small percentage of a tailing inhibitor.19G39-Polyethylene glycol(av.mol.wt.about 1500).G40-Ethylene glycol adipate.G41-Phenylmethyldimethylsilicone(10% phenyl-substituted).G42-35% phenyl-65% dimethylpolysiloxane(percentages refer to molar substitution).G43-6% cyanopropyhenyl-94% dimethylpolysiloxane(percentages refer to molar substitution).G44-2% low molecular weight petrolatum hydrocarbon grease and 1% solution of potassium hydroxide.G45-Divinylbenzene-ethylene glycol-dimethylacrylate.G46-14% Cyanopropylphenyl-86% methylpolysiloxane.G47-Polvethylene glycol(av.mol.wt.of about 8000).G48-Highly polar,partially cross-linked cyanopolysiloxane.G49-Proprietary derivatized phenyl groups on a polysiloxane backbone.20 SupportsNOTE-Unless otherwise specified,mesh sizes of 80 to 100 or,alternatively,100 to 120 are intended.S1A-Siliceous earth for gas chromatography has been fluxcalcined by mixing diatomite with Na2CO3 flux and calcining above 900°.The siliceous earth is acid-washed ,then water-washed until neutral,but not base-washed.The silieous earth may be silanized by treating with an agent such as dimethyldichlorosilane21 to mask surface silanol groups.S1AB-The siliceous earth as described above is both acid-and base-washed.21S1C-A support prepared from crushed firebrick and calcined or burned with a clay binder above 900°with subsequent acid-wash.It may be silanized.S1NS-The siliceous earth is untreated.S2-Styrene-divinylbenzene copolymer having a nominal surface area of less than50㎡ per g and an average pore diameter of 0.3 to 0.4 μm.S3-Copolymer of ethylvinylbenzene and divinylbenzene having a nominal surface ared of 500 to 600 ㎡per g and an average pore diameter of 0.0075μm.S4-Styrene-divinylbenzene copolymer with aromatic-O and –N groups, having a nominal surface area of 400 to 600㎡ per g and an average pore diameter of 0.0076μm.S5-40-to60-mesh,high-molecular weight tetrafiuorethylenepolymer.S6-Styrene-divinylbenzene copolymer having a nominal surfasearea of 250 to 350㎡ per g and an average pore diameter of 0.0091μm.S7-Graphitized carbon having a nominal surface area of 12㎡ per g.S8-Copolymer of 4-vinyl-pyridine and styrene-divinylbenzene.S9-A porous polymer based on 2,6-diphenly-p-phenylene oxide.S10-A highly polar cross-linked copolymer of acrylonitrite and divinylbenzene.S11-Graphitized canbon having a nominal surface area of 100㎡ per g modified with small amounts of petrolatum and polyethylene glycol compound,22S12-Graphitized carbon having a nominal surface ared of 100 ㎡ per g.
来源  USP色谱柱中文解说
  评论这张
 
阅读(10)| 评论(0)
推荐 转载

历史上的今天

在LOFTER的更多文章

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2017